Technical – My Blog & My Life

Filament Extruder.

May 15, 2018 by Admin

Admin

I was given a kit by Shi en to mock up an filament extruder. The only problem is that it is an open concepta and some of the parts i have trouble to connect the joints and some of the plastic parts i need to replace. I mock up my…

Setting up the circuits for Lowrider Cnc with Tiny G

April 23, 2018 by Admin

Admin

Well, the title tells it all. Setting up the whole based of electronics. What i need left is the usb and direct connector power. Since I am using high amps, I used the normal electrical cable that used 240vac.

Cheap Ballbearing by dismantling Spinners

April 18, 2018April 18, 2018 by Admin

Admin

Not sure about this but it seems that Spinners are now outdated trend. If you look closely, some spinners u can salvage the ballbearing cheap and good. Cash Converter in Jurong East selling at SG$1 = 4 ballbearings of 608RS for just 25 cents. Some Budget Shops sells at $0.50…

Lowrider CNC with Modded Parts

April 18, 2018April 18, 2018 by Admin

Admin

It had been sometime since I updated my blog. Currently, I had completed all the items in the bom list but I hit some hiccups. Found out that the GT2 16 teeth big hole was too big for nema17. Later found out that it is meant for nema17 with gear.…

SD & MicroSD Card Holder

February 26, 2018February 26, 2018 by Admin

Admin

I post it in Thingverse. Any comments, please leave it here. https://www.thingiverse.com/thing:2807135

Install 3d Fox Pro

February 24, 2018February 24, 2018 by Admin

Admin

Hi Guise, I seem to have a problem with the current SD card. To counter it, I installed 3D Fox Pro on my Android TX Box and link it to my WanHao Duplicator i3! Work fine. It could control my printer. 3D Fox Pro https://play.google.com/store/apps/details?id=com.fox3d.controller.pro&hl=en

Coding Wemos D1 Mini with PWM/Servo/Drive Plate 16 Channel PWM Controller IIC Port

February 12, 2018February 13, 2018 by Admin

Admin

Hi Guise, I am starting this project to learn more about firmware and servos. This idea was from Glenn(Click Here). Actually he asked me to create a Vorpal Robot. Looking at the number of servos, I was thinking of creating a whole hand instead. It would be kinky to have…

3d Printed Rod & Katana Holder

June 29, 2017June 29, 2017 by Admin

Admin

I hated my rod to be in the mess... So I printed a holder

CNC Milling Project 1400 x 2000 (Can be 200-1500 for X Axis while 200 – 2000 for Y Axis)

May 26, 2017June 29, 2017 by Admin

Admin

I will be mocking a CNC Milling that hold up to milling. This project is a 4 months project.

Pure Aluminium LongBoard Project

April 17, 2016 by Admin

Admin

I will custom create my own Longboard which is not made of wood but aluminium. I will subdivide them into Stages. Stage 1 : Aluminium Base Stage 2 : Cutting, Drilling & Filing Stage 3 : Apply sticky sandpaper to top base Stage 4 : 3d Print side for Deco…

1 2 Next »